Jewelry is so magical, it can bring us unlimited thoughts, beautiful, romantic, noble, elegant... Then you can't bear to watch them suffer damage due to poor maintenance? Below, Aurie Jewelry Co., Ltd teaches you that colored jewelry should How to maintain.
1. Emerald is a brittle gem. Natural emeralds tend to be smashed and prone to rupture, so avoid strong crushing and collision. Immersion or incorporation of glue to mask the cracks in the crucible is a common method of treating emeralds. Silversmiths reminded that emerald jewelry must also avoid overheating.
2. Red sapphire is the most easily protected gemstone of colored gemstones. These two gemstones have high hardness, medium toughness and stable nature. They can be worn for a long time as long as they do not violently collide and avoid high temperatures.
3, gold emerald (including stone and cat's eye) is a gemstone with good hardness and toughness, so it is an ideal male gem. It is generally only necessary to avoid high temperatures during the wearing process, especially when changing the style or repairing, do not let the flame directly face the gem.
4. Tourmaline is a kind of gemstone with soft luster, but the disadvantage is that the hardness is lower and the brittleness is stronger. Therefore, wearing jewelry made of tourmaline, should be careful not to rub against other gems, so as not to scratch.
Tourmaline has thermoelectricity (so known as tourmaline), which absorbs some fine dust after being exposed to heat by the sun or by heat. Therefore, people working in a dusty environment should be careful to clean the gemstone with a neutral detergent such as alcohol to keep it shiny and feminine. At the same time, tourmaline should also avoid overheating, because heat can sometimes change the color of the tourmaline.
5, topaz (topas stone), moonlight gemstones should avoid collision, because both have cleavage, after the collision, the gemstone is easy to split in one direction and make it completely or partially destroyed.
6, spinel, garnet is a medium-quality gemstone, generally just pay attention not to collide with each other.
7, crystal should avoid contact with radioactive materials, try to avoid contact with heat sources. Crystals will change color under radioactive exposure (such as workers engaged in X-ray fluoroscopy), while amethyst may appear faded when heated.
8. Zircon and olivine cannot be placed together with other gemstones. Zircon and olivine are gemstones formed in the underground high-temperature environment. They are brittle in nature and have low hardness. Therefore, it is often difficult to make large gemstones due to too many cracks in the raw materials. The mutual friction between the finished gemstones also grinds the edges of the gemstones and causes the gemstones to lose "sharpness." Aurie Jewelry Co., Ltd processing factory reminds that these two kinds of gems can not meet heat, heat will increase its brittleness. Olivine is also afraid of acid, and long-term contact with acidic substances will cause the surface of the gem to be corroded and weaken its luster.